Screen Printing

The newest printers use pigment ink instead of dye ink because it resists fading for up to 99 years. This improves family snapshots, but doesn't help the making of UV opaque positives. The nano porous structure of the coating controls the ink spread for...

Union Maxopake Inks are the most opaque plastisol colors available in the market today. These inks are highly versatile and can be used for direct manual or automatic machine printing on light and dark colored garments. Proper use of Maxopake inks will eliminate the...

These inks are highly versatile and can be used for direct manual or automatic machine printing on light colored garments, or on dark colored garment with a white underbase. If you are looking for a color that is not listed call us at (619)...

Shares the main characteristics of Ulano's TZ emulsions, but with a higher solids content and even better resolution, edge definition, and exposure latitude. Stencils produced with 925WR are completely water resistant and very durable. 925WR comes with a syrup diazo sensitizer, for faster and...

Ulano LX-680 Emulsion/GL. (Replacement for DLX)

Orange is a ready-to-use SBQ-photopolymer direct emulsion formulated for imprinted sportswear printing. It is formulated with a “masking color” that reduces light scattering—the major cause of loss of resolution. With Orange, it is possible to use less costly white mesh without the closing up...

GR-31 is a water soluble ink degradent. It is highly effective on laquer ink, laquer stencil, enamel, vinyl, mylar, poster, UV, plastisol and epoxy ink. I When used for screen reclamation, begin by carding off excees ink from screen. II Spray GR-31 onto the...

APPLICATION This product is designed for plastisol and UV inks when reclaiming your screen or for removing the ink only and saving the screen. JP-53 is emulsion and capillary stencil safe. It will protect the fabric from deep stains or ghosting from the image...

APPLICATION This product is designed for the removal of plastisol and UV inks when reclaiming your screen or for the removing the ink only and saving the screen. TS-305 is emulsion and capillary stencil safe. It will protect the fabric from deep stains or...

APPLICATION PRESS WASH LV is designed for the removal of all inks, especially vinyl, water base, epoxy and enamel. This product will protect the fabric from deep stains or ghosting from the image print, which makes it much easier when complete reclamation of the...

APPLICATION RC-5 is designed for all inks, especially UV, vinyl, epoxy, and enamel. This product will protect the fabric from deep stains or ghosting from the image print, which makes it much easier when complete reclamation of the screen is necessary. RC-5 will perform...

APPLICATION ER/30s is designed for the removal of all photo-polymer, diazo and capillary film emulsions. ER/30s is safe on all types of mesh and is drain acceptable to a treatment plant,after soil release when used as directed. I Use concentrated, or can be diluted...

GEMZYME is designed for removal of all photo polymer, diazo, and capillary film emulsions. GEMZYME will immediately liquify and break down the emulsion and dramatically increase the speed of the reclaim procedure. *Contains natural enzymes to help degrade the emulsion* APPLICATION This product is...

APPLICATION This is a super concentrated formula for degreasing and wetting all types of screen fabrics, including polyester, nylon and stainless steel. When completely water rinsed, NUTRALYZE leaves your fabric free of silicones or other types of oils and contaminants that tend to leave...

APPLICATION I Apply GB-2000 to the ink side of the screen. Allow the coating to penetrate up to 5 minutes. For tougher stains, brush product on both sides of the screen. II Low pressure rinse (flood rinse with tap water pressure), removing all chemicals...

APPLICATION Mix this product thoroughly before using. I Apply HC/100 to the ink side of the screen. Allow the coating to penetrate up to 5 minutes. For tougher stains, brush product on both sides of the screen. II Low pressure rinse (flood rinse with...

Ideal for Water-Based and Discharge Printing AQUA-BLOCK is a water-based, yet water resistant, violet block-out designed to fill the open areas of the screen not covered by the emulsion. Use for masking several designs on a screen until ready to print or for multi-color...

APPLICATION This product is a medium viscosity, water soluble red blockout designed to fill the open areas of the screen not covered by the emulsion. I When the screen is dry and free of contaminants, pour RED-COAT on the print side of the screen....

APPLICATION This product is a medium viscosity, water soluble red blockout designed to fill the open areas of the screen not covered by the emulsion. I When the screen is dry and free of contaminants, pour RED-COAT on the print side of the screen....

Lunar Cotton White PADE1040 an easy printing, high opacity, satin hand white with an excellent coverage and mat down on dark garments. The low tack, creamy formula allows printing through finer mesh counts without the need for a viscosity modifier. This optically brightened ink achieves a...