My Store

Ideal for Water-Based and Discharge Printing AQUA-BLOCK is a water-based, yet water resistant, violet block-out designed to fill the open areas of the screen not covered by the emulsion. Use for masking several designs on a screen until ready to print or for multi-color...

ClearShield Classic is a high-viscosity water-based liquid coating for enhanced UV-protection, chemical and abrasion resistance and dirt pick up resistance. For use on most non-water sensitive materials, ClearShield Classic offers the highest film build of all the formulations. It is perfect for vinyl, banners,...

ClearShield Classic is a high-viscosity water-based liquid coating for enhanced UV-protection, chemical and abrasion resistance and dirt pick up resistance. For use on most non-water sensitive materials, ClearShield Classic offers the highest film build of all the formulations. It is perfect for vinyl, banners,...

Applications Protection of digital image prints and screen printed images for exhibit and display graphics up to 4 year outdoors Thickness 3 mil Finishes Available in Gloss, lustre (semi-gloss) and matte finish Some sizes/colors may be special order.

APPLICATION ER/30s is designed for the removal of all photo-polymer, diazo and capillary film emulsions. ER/30s is safe on all types of mesh and is drain acceptable to a treatment plant,after soil release when used as directed. I Use concentrated, or can be diluted...

Roland OEM Wiper. PN 1000027150 Compatible with the following machines: XR-640 VS-300, 300i, VS-540, 540i, VS-640, 640i RF-640 RE-640

Roland OEM Filter Under. PN 22275122. Compatible with the following machines: SC-540/SC-540EX/SC-545EX XJ-540/XJ-640/XJ-740 XC-540/XC-540MT/XC-540W LEC-300/LEC-300A/LEC-330/LEC-540 LEJ-640

Roland OEM Filter Under. PN 22275120. Compatible with the following machines: SP-300/SP-300V/SP-540V

Roland OEM Filter Upper. PN 1000000416. Compatible with the following machines: SP-300/SP-300V/SP-540V

Roland OEM Filter Upper. PN 1000000415. Compatible with the following machines: SC-540/SC-540EX/SC-545EX XJ-540/XJ-640/XJ740 XC-540/XC-540MT/XC-540W LEC-300/LEC-300A/LEC-330/LEC-540 LEJ-640

APPLICATION This product is a paste ghost / image stain remover. GB-1000 is designed for the removal of cured ink stains. *This product should be mixed thoroughly before using. I Apply GB-1000 to the ink side of the screen. Allow the coating to penetrate...

APPLICATION I Apply GB-2000 to the ink side of the screen. Allow the coating to penetrate up to 5 minutes. For tougher stains, brush product on both sides of the screen. II Low pressure rinse (flood rinse with tap water pressure), removing all chemicals...

GEMZYME is designed for removal of all photo polymer, diazo, and capillary film emulsions. GEMZYME will immediately liquify and break down the emulsion and dramatically increase the speed of the reclaim procedure. *Contains natural enzymes to help degrade the emulsion* APPLICATION This product is...

GF 231 is a premium 2.4 mil calendered gloss clear laminate with a clear permanent acrylic adhesive on a 53# PE coated kraft liner. This laminate offers protection from ultra violet radiation, moisture and other environmental exposures. It is can be laminated by using...

Applications Protection of long-term indoor and outdoor digital print applications Thickness 2 mil Durability Up to 8 years Release Liner 74# / 120 gsm Liner Adhesive; Clear Solvent Permanent Adhesive Finishes Available in gloss and matte finish Some sizes/colors may be special order.

Designed for use with 1.5mm CB015U blades for vinyl and window tint film cutting. Must remove spring for CB15U-K20-SP. Blade not included. Check out our Graphtec America Blade FAQ (Click Here for FAQ) to see which blade and blade holder is right for your...

APPLICATION Mix this product thoroughly before using. I Apply HC/100 to the ink side of the screen. Allow the coating to penetrate up to 5 minutes. For tougher stains, brush product on both sides of the screen. II Low pressure rinse (flood rinse with...

APPLICATION This product is designed for plastisol and UV inks when reclaiming your screen or for removing the ink only and saving the screen. JP-53 is emulsion and capillary stencil safe. It will protect the fabric from deep stains or ghosting from the image...

Double bladed, extra long, 5 inch squeegee, allows easier application of pressure sensitive materials.

Roland OEM Filter Under. PN 1000015117. Compatible with the following machines: SP-300i/SP-540i