Chemicals

GR-31 is a water soluble ink degradent. It is highly effective on laquer ink, laquer stencil, enamel, vinyl, mylar, poster, UV, plastisol and epoxy ink. I When used for screen reclamation, begin by carding off excees ink from screen. II Spray GR-31 onto the...

APPLICATION This product is designed for plastisol and UV inks when reclaiming your screen or for removing the ink only and saving the screen. JP-53 is emulsion and capillary stencil safe. It will protect the fabric from deep stains or ghosting from the image...

APPLICATION This product is designed for the removal of plastisol and UV inks when reclaiming your screen or for the removing the ink only and saving the screen. TS-305 is emulsion and capillary stencil safe. It will protect the fabric from deep stains or...

APPLICATION PRESS WASH LV is designed for the removal of all inks, especially vinyl, water base, epoxy and enamel. This product will protect the fabric from deep stains or ghosting from the image print, which makes it much easier when complete reclamation of the...

APPLICATION RC-5 is designed for all inks, especially UV, vinyl, epoxy, and enamel. This product will protect the fabric from deep stains or ghosting from the image print, which makes it much easier when complete reclamation of the screen is necessary. RC-5 will perform...

APPLICATION ER/30s is designed for the removal of all photo-polymer, diazo and capillary film emulsions. ER/30s is safe on all types of mesh and is drain acceptable to a treatment plant,after soil release when used as directed. I Use concentrated, or can be diluted...

GEMZYME is designed for removal of all photo polymer, diazo, and capillary film emulsions. GEMZYME will immediately liquify and break down the emulsion and dramatically increase the speed of the reclaim procedure. *Contains natural enzymes to help degrade the emulsion* APPLICATION This product is...

APPLICATION This is a super concentrated formula for degreasing and wetting all types of screen fabrics, including polyester, nylon and stainless steel. When completely water rinsed, NUTRALYZE leaves your fabric free of silicones or other types of oils and contaminants that tend to leave...

APPLICATION This product is a paste ghost / image stain remover. GB-1000 is designed for the removal of cured ink stains. *This product should be mixed thoroughly before using. I Apply GB-1000 to the ink side of the screen. Allow the coating to penetrate...

APPLICATION I Apply GB-2000 to the ink side of the screen. Allow the coating to penetrate up to 5 minutes. For tougher stains, brush product on both sides of the screen. II Low pressure rinse (flood rinse with tap water pressure), removing all chemicals...

APPLICATION Mix this product thoroughly before using. I Apply HC/100 to the ink side of the screen. Allow the coating to penetrate up to 5 minutes. For tougher stains, brush product on both sides of the screen. II Low pressure rinse (flood rinse with...

Ideal for Water-Based and Discharge Printing AQUA-BLOCK is a water-based, yet water resistant, violet block-out designed to fill the open areas of the screen not covered by the emulsion. Use for masking several designs on a screen until ready to print or for multi-color...

APPLICATION This product is a medium viscosity, water soluble red blockout designed to fill the open areas of the screen not covered by the emulsion. I When the screen is dry and free of contaminants, pour RED-COAT on the print side of the screen....

APPLICATION This product is a medium viscosity, water soluble red blockout designed to fill the open areas of the screen not covered by the emulsion. I When the screen is dry and free of contaminants, pour RED-COAT on the print side of the screen....